Job Description Summary

Job Description

용접 (생산직)

1. 담당업무

- HRSG 제작을 위한 용접 작업 수행

- GTAW, FCAW, SMAW 등 다양한 용접 방식 적용

- 용접 후 Self-visual inspection 및 품질 점검

- 도면 및 작업 지시서에 따른 용접 위치 및 조건 설정

- 작업장 내 안전 및 품질 기준 준수

2. 자격 및 필요 조건

- 경력사항: 신입 또는 3년 이상 경력직

- 학력사항: 고졸 및 초대졸

- 직무기술:

. 도면 해독 및 용접 조건 설정 능력

. 업무에 필요한 EHS 및 품질에 대한 지식

3. 요구되어지는 인적특성

- GE에서 요구하는 기본적인 소양과 정직성

- 생산시 요구되는 품질수준 준수

- 수행업무에 대한 책임감

- 건강검진 또는 업무상 필요한 검사결과를 요청할 수 있으며, 미제출 또는 부적합하다고 판단하는 경우 채용이 취소될 수 있음

4. 우대사항

- 용접 경력 5년 이상

- 용접 자격증 보유자 (예: 용접기사, 용접기능장 등)

- 제관과 협업 가능한 작업자

- 정밀 용접 및 고난도 작업 수행 가능자

- HRSG 또는 발전설비 관련 용접 경험자 우대

영어 JD

Roles and Responsibilities:

I. Job Summary

An experienced Welder to join HRSG production team in Changwon factory. The role involves performing high-quality welding in accordance with drawings and WPS (Welding Procedure Specification), ensuring compliance with safety and quality standards, and supporting production schedules.

II. Essential Functions, responsibilities

Perform welding works on boilers, heat exchangers, and pressure vessels (SMAW, GTAW, FCAW, etc.)Interpret and follow welding drawings and WPS requirementsEnsure weld quality meets NDT (Non-Destructive Testing) acceptance criteria and standardsInspect, maintain, and manage welding equipment and toolsComply with workplace safety regulations and eliminate potential hazards before workCollaborate with the other teams when necessary

III. Qualifications requirements

Experience: Minimum 3 years in welding for boilers, pressure vessels, or heavy industry manufacturingHolder of welding-related certifications (e.g., Special Welding Technician, Industrial Engineer Welding, or equivalent)Skilled in SMAW (Shielded Metal Arc Welding), GTAW (TIG), and FCAW (Flux-Cored Arc Welding)Ability to read and interpret technical drawings

IV. EHS requirement

Know and follow established job specific and facility wide environment, health and safety procedures and rulesMaintain housekeeping in work areaMaintain Environment, health and safety equipment in good working orderActively participate in Environment, health and safety training and demonstrate competency based on training receivedKeep other employees aware of health and safety practices and activities by actively observing fellow employee work practices and incorporating safety in their daily tasksActively participate in accident, injury and illness prevention activities:Develop Safety Risk Analyses (SRA) and safe working proceduresIdentify and correct hazards and unsafe conditionsAccident, nearmiss accident or potential hazard investigationsParticipate actively in providing suggestions for Environment, health and safety program improvementBring Environment, health and safety issues, unsafe acts and safety suggestions to management's attention or correct those they canKnow and implement regulatory compliance requirements in their work area

V. Quality requirement

Understand and comply with procedures and work instructionsStop the process and report when any abnormality that might cause defects, escaping defectDon't accept defects, don't make defects and don't pass defectsContinuous improve quality performance of products

VI. Desired Characteristics

Valid welding certifications in ASME, KS, or EN standardsExperience in large boiler and power plant equipment fabricationKnowledge of welding automation and mechanized welding equipmentCompletion of occupational safety and health trainingOpen & Honest and TrustworthyCan work individually and/or in a team and can handle high working pressure / ResilienceUp to date technical Knowledge of the latest trends in manufacturing Technology and ability to apply and adaptTeam work & leadership skills

Additional Information

Relocation Assistance Provided: No