Work Flexibility: Hybrid

What you will do:Interact with the various product development teams and understand the requirements for SI / PI / EMC / EMI / Motor simulationPerform the SI / PI / EMC / EMI analyses using the commercial tools, e.g., ANSYS, Dassault System, Mathwork and CadanceModel preparation, Pre & Post layout analysis and the interpretation of the results. Verify the results for accuracy and convergenceValidate the analysis results against closely equivalent international standards, experimental results or analytical solution as availableDevelop methods, tools, and procedures to shorten the simulation time for complex problemsCreate analysis reports, reference manual and lessons learnt documentParticipate in simulation workshops, forums, training & conferences both internal & externalWhat You needMust have skills: Strong Electronics Basics, with knowledge of Digital/Analog/Mixed/High speed signals, multi board simulation, Motor simulation, thermal simulation, battery simulation and Antenna simulation.Good knowledge of interfaces like DDR2/3/4/5, RS232/422/485, SPI, I2C, NAND/NOR Flash/PCI express/SERDES.Should be aware of signal integrity issues i.e. effects of packaging, board parasitic, crosstalk, noise, grounding and shielding etc.Should have knowledge of power integrity issues like IR drop and decoupling analysis.Good knowledge of system level simulation like Radiated emission simulation and conducted emission simulation and ESD simulations. Should have experience in simulation of different types of motors including PMDC and BLDC motors.Good to Have skillsExperience in board thermal management and battery simulation.Prior experience in medical domain and EMI/EMC physical testing is a plus. Education:B. Tech. / M.S in Electronics Engineering Experience:Experience: 4 -7 years in electrical simulation - SI / PI / EMC / EMI Analysis

Travel Percentage: 10%