Job details Primarily responsible to repair, maintain, and perform routine maintenance on production equipment, plant utilities, plant service equipment, building, grounds, etc. There is a large amount of electrical work and welding required.

Responsibilities: ... Mechanical: Responsible for installing special functional and structural parts in devices. Adjusts functional parts of devices and control instrumentation. Maintains and repairs air compressors, air dryers, gas systems, alarm system, water and vacuum systems, etc. Follows Preventive Maintenance Instructions and ensures that the records for such are properly documented.
Electrical: Perform electrical troubleshooting, read electrical diagrams and symbols. Able to read and write advanced electrical schematics. Must be able to read P& ID drawings, use handheld voltage meter, oscilloscopes, ammeters, etc.
Welding: Lays out, positions, aligns and fits together fabricated parts of metal according to layouts, work orders, blueprints, schematics and sketches in preparation for welding. Tack-welds pieces together. Applies appropriate welding processes to join, surface, fabricate and repair parts of metal or other weldable materials according to layouts, work orders, blueprints schematics and sketches using manual and/or semi-automatic welding equipment. May lay out and mark weld points on parts or subassemblies. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May inspect completed work for conformance to specifications.
Fabrication: Dismantles devices to gain access to and remove defective parts. Conduct periodic inspections to determine required maintenance workflow. Design/Build complex parts as needed for plant using all mill wright tools (lathe, index mill, welding, press, bender, etc.).
Heating/Cooling: Advanced air conditioning and heating circuits, trouble shooting and repair chillers and air dryers.
Projects: Must be well rounded maintenance person and must have knowledge and experience in areas of troubleshooting and repairing hydraulic, pneumatics and electrical motion control components.

Working hours: Various Shifts Available

Skills:
Qualifications:

A High School Graduate or General Education Degree (GED) is required. An associate degree (two-year college or technical school) is preferred.
Must have experience in maintenance in a manufacturing environment.
Intermediate computer skills including Microsoft Office.
Forklift Certification or other mobile equipment such as scissor lifts and jenny booms are preferred.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, resident ["green card" holders] or have refugee or asylee status.

Education:
Bachelors

Experience:
4-7 years

Qualifications:
Qualifications:

A High School Graduate or General Education Degree (GED) is required. An associate degree (two-year college or technical school) is preferred.
Must have experience in maintenance in a manufacturing environment.
Intermediate computer skills including Microsoft Office.
Forklift Certification or other mobile equipment such as scissor lifts and jenny booms are preferred.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, resident [???green card??? holders] or have refugee or asylee status.


Please stop by our office with an up-to-date resume or give us a call at 936-559-7777.

Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).

Show lessShow more Primarily responsible to repair, maintain, and perform routine maintenance on production equipment, plant utilities, plant service equipment, building, grounds, etc. There is a large amount of electrical work and welding required.

Responsibilities:
Mechanical: Responsible for installing special functional and structural parts in devices. Adjusts functional parts of devices and control instrumentation. Maintains and repairs air compressors, air dryers, gas systems, alarm system, water and vacuum systems, etc. Follows Preventive Maintenance Instructions and ensures that the records for such are properly documented.
Electrical: Perform electrical troubleshooting, read electrical diagrams and symbols. Able to read and write advanced electrical schematics. Must be able to read P& ID drawings, use handheld voltage meter, oscilloscopes, ammeters, etc. ... Welding: Lays out, positions, aligns and fits together fabricated parts of metal according to layouts, work orders, blueprints, schematics and sketches in preparation for welding. Tack-welds pieces together. Applies appropriate welding processes to join, surface, fabricate and repair parts of metal or other weldable materials according to layouts, work orders, blueprints schematics and sketches using manual and/or semi-automatic welding equipment. May lay out and mark weld points on parts or subassemblies. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May inspect completed work for conformance to specifications.
Fabrication: Dismantles devices to gain access to and remove defective parts. Conduct periodic inspections to determine required maintenance workflow. Design/Build complex parts as needed for plant using all mill wright tools (lathe, index mill, welding, press, bender, etc.).
Heating/Cooling: Advanced air conditioning and heating circuits, trouble shooting and repair chillers and air dryers.
Projects: Must be well rounded maintenance person and must have knowledge and experience in areas of troubleshooting and repairing hydraulic, pneumatics and electrical motion control components.

Working hours: Various Shifts Available

Skills:
Qualifications:

A High School Graduate or General Education Degree (GED) is required. An associate degree (two-year college or technical school) is preferred.
Must have experience in maintenance in a manufacturing environment.
Intermediate computer skills including Microsoft Office.
Forklift Certification or other mobile equipment such as scissor lifts and jenny booms are preferred.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, resident ["green card" holders] or have refugee or asylee status.

Education:
Bachelors

Experience:
4-7 years

Qualifications:
Qualifications:

A High School Graduate or General Education Degree (GED) is required. An associate degree (two-year college or technical school) is preferred.
Must have experience in maintenance in a manufacturing environment.
Intermediate computer skills including Microsoft Office.
Forklift Certification or other mobile equipment such as scissor lifts and jenny booms are preferred.
This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, resident [???green card??? holders] or have refugee or asylee status.


Please stop by our office with an up-to-date resume or give us a call at 936-559-7777.

Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.

Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.

Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).

Show lessShow morekey responsibilities

Mechanical: Responsible for installing special functional and structural parts in devices. Adjusts functional parts of devices and control instrumentation. Maintains and repairs air compressors, air dryers, gas systems, alarm system, water and vacuum systems, etc. Follows Preventive Maintenance Instructions and ensures that the records for such are properly documented. Electrical: Perform electrical troubleshooting, read electrical diagrams and symbols. Able to read and write advanced electrical schematics. Must be able to read P& ID drawings, use handheld voltage meter, oscilloscopes, ammeters, etc. Welding: Lays out, positions, aligns and fits together fabricated parts of metal according to layouts, work orders, blueprints, schematics and sketches in preparation for welding. Tack-welds pieces together. Applies appropriate welding processes to join, surface, fabricate and repair parts of metal or other weldable materials according to layouts, work orders, blueprints schematics and sketches using manual and/or semi-automatic welding equipment. May lay out and mark weld points on parts or subassemblies. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May inspect completed work for conformance to specifications. Fabrication: Dismantles devices to gain access to and remove defective parts. Conduct periodic inspections to determine required maintenance workflow. Design/Build complex parts as needed for plant using all mill wright tools (lathe, index mill, welding, press, bender, etc.). Heating/Cooling: Advanced air conditioning and heating circuits, trouble shooting and repair chillers and air dryers. Projects: Must be well rounded maintenance person and must have knowledge and experience in areas of troubleshooting and repairing hydraulic, pneumatics and electrical motion control components.

experience

4-7 years

skills

Qualifications:A High School Graduate or General Education Degree (GED) is required. An associate degree (two-year college or technical school) is preferred. Must have experience in maintenance in a manufacturing environment. Intermediate computer skills including Microsoft Office. Forklift Certification or other mobile equipment such as scissor lifts and jenny booms are preferred. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, resident ["green card" holders] or have refugee or asylee status.

qualifications

Qualifications:A High School Graduate or General Education Degree (GED) is required. An associate degree (two-year college or technical school) is preferred. Must have experience in maintenance in a manufacturing environment. Intermediate computer skills including Microsoft Office. Forklift Certification or other mobile equipment such as scissor lifts and jenny booms are preferred. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, resident [???green card??? holders] or have refugee or asylee status.

education

Bachelors

share this job.