​Position requires training. Tasks are generally repetitive operations and other manual tasks. Requires lifting, use of 24 - 30 ounce hammer, electric sander, and hand driver. ​Work safely to prevent on-the-job injuries by following company and OSHA safety rules and regulations, understanding machine safeguards, recognizing and reporting safety hazards and wearing required PPE. Adjust product after it is assembled to ensure that it cuts and is set properly.   Inspect product for quality using visual inspections. Communicate to supervision any alterations needed to be made to product. Maintain minimum standard rate. Report accurate count of production parts, scrap, and labor hours by completing required paperwork. Keep work area in clean and orderly condition, complying with established 6S standards. Perform all other duties as assigned. Qualifications High School Diploma (GED) is preferred and a minimum of one year of experience is required. Must be familiar with OSHA regulations and have the ability to work well with others. Physical Demand Requirements
  ​Sitting and walking up to 10 hours per day (can rotate), bing/twisting neck up to 2 hours per day (interruptive), bending/twisting waist up to 2 hours per day (interruptive), hand movement, up to 10 hours per day (repetitive), arm movement, up to 10 hours per day (repetitive), pushing/pulling weight (assisted), up to 2 hours per day (interruptive), and lifting weight, up to 10 lbs, up to 10 hours per day (interruptive).   Pay Range: $15-$17 per hour