Responsibilities:
Follow the V model for software developments
Interface with Systems engineering to ensure software requirements are documented appropriately and analyze prior to software design and implementation.
Guide implementation of new electronics, sensors, and components into mechatronic systems.
Ensure document traceability from requirements through test cases.
Use of data acquisition systems over CCP/XCP (e.g.INCA, ATi,Vector)
Identify and close safety issues, and their corrective actions.
Development and support turbocharger electric high speed motor technology. This includes application selection guidance, validation, controller tuning, and system trouble shooting.
Electronic understanding from a performance, hardware, and microprocessor software standpoint. This includes the ability to use and interpret LIN, SENT, CAN and PWM communication protocols.
Will partner with logistics team to develop and evaluate vendors, and to identify alternative solutions to support supply chain issues.
Other duties/tasks to be assigned as needed.
Working hours: 8:00 AM - 5:00 PM
Skills:
Experience with control system fundamentals, motors & drives, and wiring systems.
Knowledge, and experience with high temperature instrumentation for measuring flow, pressure, temperature, imbalance, rotor motion, and vibration.
Familiarity with electrical test equipment including oscilloscopes, power analyzers, and multimeters as well as a basic understanding of electrical safety.
Experience writing technical statements of work (SOW).
Education:
Bachelors
Experience:
4-7 years
Qualifications:
Bachelor???s degree in Electrical Engineering, Mechatronics Engineering, or other engineering field.
Fundamentally sound electrical engineering knowledge with the ability to adapt to new environments.
Ability to coordinate with engineering development with individuals in multiple locations/time zones, and across multiple teams/groups.
Knowledge of MATLAB-Simulink including state flow.
Ability to use all Microsoft Office Products
Ability to read, write, and understand English.
If you're passionate about PLCs, HMI, and driving efficiency, then this Controls Engineer role is your next challenge. Advance your career in automation! Apply now or send your resume to jordandevere@spherion.com.
Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.
Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).
Responsibilities:
Follow the V model for software developments
Interface with Systems engineering to ensure software requirements are documented appropriately and analyze prior to software design and implementation. ... Guide implementation of new electronics, sensors, and components into mechatronic systems.
Ensure document traceability from requirements through test cases.
Use of data acquisition systems over CCP/XCP (e.g.INCA, ATi,Vector)
Identify and close safety issues, and their corrective actions.
Development and support turbocharger electric high speed motor technology. This includes application selection guidance, validation, controller tuning, and system trouble shooting.
Electronic understanding from a performance, hardware, and microprocessor software standpoint. This includes the ability to use and interpret LIN, SENT, CAN and PWM communication protocols.
Will partner with logistics team to develop and evaluate vendors, and to identify alternative solutions to support supply chain issues.
Other duties/tasks to be assigned as needed.
Working hours: 8:00 AM - 5:00 PM
Skills:
Experience with control system fundamentals, motors & drives, and wiring systems.
Knowledge, and experience with high temperature instrumentation for measuring flow, pressure, temperature, imbalance, rotor motion, and vibration.
Familiarity with electrical test equipment including oscilloscopes, power analyzers, and multimeters as well as a basic understanding of electrical safety.
Experience writing technical statements of work (SOW).
Education:
Bachelors
Experience:
4-7 years
Qualifications:
Bachelor???s degree in Electrical Engineering, Mechatronics Engineering, or other engineering field.
Fundamentally sound electrical engineering knowledge with the ability to adapt to new environments.
Ability to coordinate with engineering development with individuals in multiple locations/time zones, and across multiple teams/groups.
Knowledge of MATLAB-Simulink including state flow.
Ability to use all Microsoft Office Products
Ability to read, write, and understand English.
If you're passionate about PLCs, HMI, and driving efficiency, then this Controls Engineer role is your next challenge. Advance your career in automation! Apply now or send your resume to jordandevere@spherion.com.
Spherion has helped thousands of people just like you find work happiness! Our experienced staff will listen carefully to your employment needs and then work diligently to match your skills and qualifications to the right job and company. Whether you're looking for temporary, temp-to-perm or direct hire opportunities, no one works harder for you than Spherion.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
At Spherion, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require a reasonable accommodation to make your application or interview experience a great one, please contact Callcenter@spherion.com.
Pay offered to a successful candidate will be based on several factors including the candidate's education, work experience, work location, specific job duties, certifications, etc. In addition, Spherion offers a comprehensive benefits package, including: medical, prescription, dental, vision, AD&D, and life insurance offerings, short-term disability, and a 401K plan (all benefits are based on eligibility).
Follow the V model for software developmentsInterface with Systems engineering to ensure software requirements are documented appropriately and analyze prior to software design and implementation.Guide implementation of new electronics, sensors, and components into mechatronic systems.Ensure document traceability from requirements through test cases.Use of data acquisition systems over CCP/XCP (e.g.INCA, ATi,Vector)Identify and close safety issues, and their corrective actions.Development and support turbocharger electric high speed motor technology. This includes application selection guidance, validation, controller tuning, and system trouble shooting.Electronic understanding from a performance, hardware, and microprocessor software standpoint. This includes the ability to use and interpret LIN, SENT, CAN and PWM communication protocols.Will partner with logistics team to develop and evaluate vendors, and to identify alternative solutions to support supply chain issues.Other duties/tasks to be assigned as needed.
experience4-7 years
skillsExperience with control system fundamentals, motors & drives, and wiring systems.Knowledge, and experience with high temperature instrumentation for measuring flow, pressure, temperature, imbalance, rotor motion, and vibration.Familiarity with electrical test equipment including oscilloscopes, power analyzers, and multimeters as well as a basic understanding of electrical safety.Experience writing technical statements of work (SOW).
qualificationsBachelor???s degree in Electrical Engineering, Mechatronics Engineering, or other engineering field.Fundamentally sound electrical engineering knowledge with the ability to adapt to new environments.Ability to coordinate with engineering development with individuals in multiple locations/time zones, and across multiple teams/groups.Knowledge of MATLAB-Simulink including state flow.Ability to use all Microsoft Office ProductsAbility to read, write, and understand English.
educationBachelors
share this job.