**What you’ll do:** Requirement of this position is to perform testing and provide assistance to engineering personnel to setup, install and on-time completion of accurate product testing in accordance with specific test procedures as defined by the product engineering function at Mobility Group engineering divisions globally. The position requires to : a) Perform test setups in completion of specific and standard test processes for Automotive Powertrain i.e. Preferably transmission, hydraulic systems and experience in engine, clutch & differential will be added advantage b) Complete test requests according to specified test requests with minimal down time c) Implementation of corrective action to test setups as required by established lab procedures or test requests, or when performance falls below acceptable limits d) Communicate test programs with engineering appropriately to clarify purpose of testing and the results of ongoing tests e) Take ownership of small projects, develop custom fixtures & continuously improve their skill set f) Maintain close liaison with other technicians to standardize lab practices within group and with other groups in facility to ensure a safe working environment g) Maintain close liaison with other technicians to standardize lab practices within product group and with other groups to complete test projects with a high degree of quality and efficiency h) Maintain a clean and safe working environment in the test lab that is a showpiece for customer visits. Continually work to improve the presentation of the lab for this purpose i) Strive to meet test lab performance targets established in Balanced Score Card and ensure ISO/ IATF compliance As a responsible critical position to ensure equipment uptime this position requires to: • Analyzing mechanical assembly issues related to automotive engine components is most preferred. Additional experience in engine testing will be an advantage. • Prepare the engine/cylinder head test setup – includes mechanical assembly such as engine readiness, cylinder head assembly and installation. • Troubleshooting elementary product and test rig issues and performing data analysis required by the product group. FAMOS, Altair software knowledge will be added advantage. • Understanding of data acquisition systems, hardware and software that are being used for testing like Oscilloscope, Yokogawa, Proxy sensor connection etc. • Have good knowledge of type II, type III & type V engine assembly & lash setting procedures. • Proven experience in diesel or gasoline engine valve train testing or related automotive testing. • Good understanding of diesel/ gasoline engine systems & its components. • Ability to fix any minor issues with test rigs and lab and work with his peer engineer to improve or develop any new methods solving the issues. • Reading and Creating fixture drawings using Auto CAD / Pro Engineer/ CREO. • Articulating and generating good technical reports based on test observations. • Train and monitor fellow technicians and drive completion of tests in prescribed time frame. • Work with engineers within group to define and perform custom testing as requested by customer. **Qualifications:** • Degree in Electrical Engineering with 4-5 years or Diploma 7-8 Years of experience in relevant hands-on experience in Electrical R&D Testing **Skills:** • Experience in LV/MV Switchgear Powertrain R&D testing is most desirable. Preferably in GFCI, Dimmer, Sensors, USB Receptable and LED. • Performing Electrical, Overload, Dielectric Test and basic Functional Test • Awareness of testing i.e. test rigs, data acquisition, inspection etc. • Awareness and experience in following Safety & Quality Management Practices • Experience on fault identification and propose corrective actions • Clear understanding about sensors, electronic components of DAQ & control software i.e. LabVIEW etc. • Past experience in problem solving & continuous improvement through LEAN tool deployment for test equipment utilization and cost savings